20m Exhaust heat wrap tape pipe insulation + 10 Metal strips
Features and Description:
Tape 20 m x 50 mm width x 2 mm thick.
10 Metal Strips are sent of 35,6 cm.
Able to withstand 1100 °C without deterioration.
It improves the performance of the engine and decreases the temperature of the engine compartment.
Entrega en 24 / 48 horas !
Warning: Last items in stock!
This calorie tape is developed for competition, and allows exhaust work at a constant temperature, achieving greater gas evacuation and increasing the volumetric efficiency of your engine.
In addition to these advantages you get a great look and additional protection in the exhaust, which emit less heat to the outside.
To facilitate the installation of the tape, it is advisable to dip it into clean water. With the completely soaked tape is easier to place.
Start the exhaust side nearest the motor, attached to the flange.
With the first 2 laps, place the retaining bracket. Wrap the tape squeezing lightly and overlapping about 1/4 the width of the tape, ie more than 1 cm with the previous ring.
When finished, cut the ribbon, attach the flange and cut the excess edges. Use only stainless steel flanges.
You may release smoke in the first few minutes of engine operation.
The tape can be painted with a special paint heatproof.
No customer reviews for the moment.